Stylus Taped Masking Film & Dispenser

Description

Stylus Taped Masking Film & Dispenser

This product is a non-adhesive pre-folded high-density polyethylene, static cling sheet with masking tape attached.

PERFORMANCE:
The combination of masking tape and high density, static cling pre-folded translucent PE film is paintable and will not create flaking if used correctly as shown on the packaging of the roll. The film resists solvents and withstands temperatures up to 132 degrees while the masking tape withstands 100 degrees. The film is recyclable. The plastic film has been specially treated to cling to the surface to be repaired allowing the user to perform quick masking tasks trapping the sprayed paint on its surface without causing flaking and hence no contamination of the painted vehicle. Come packed in a user-friendly hand dispenser and refill pack and barcoded.

APPLICATIONS:
Fast masking and protection of the motor vehicle in the panel shop, boats in the slipway or large areas in house painting. can be used where wet sanding occurs. Can be used to protect seats, tyres, fascia sealed beams, etc. Users should avoid using over uncured finishes or where humidity or solvent vapours could be trapped between the film and the painted surface.

Available in the following sizes and models:
Dispensers – 550mm, 1800mm, 2700mm
Refills – 550mm x 33m, 1800mm x 33m, 2700mm x 33m