PaintLine Interior Door Spray & Dry Series

Description

PAINT LINE INTERIOR DOOR SPRAY & DRY SERIES:

The PSDRID allows a single operator to quickly set up, paint, then dry full-sized doors in a minimum amount of space. Doors rotate on a foot-operated turntable as they rest on spikes to expose the bottom-edge and allow spraying of all sides of the door from a stationary position. Custom VClips attach at the hinge pocket to not only stabilize the door but also lift a wet door to move to the drying area. Heavy duty plastic bases attach to the bottom of the door with wood screws to enable the door to stand on its own and to nest closely with other doors of various widths and heights minimizing drying space.

Doors rotate on a foot-operated turntable as they rest on spikes to expose the bottom-edge and allow spraying of all sides of the door from a stationary position.

Custom VClips attach at the hinge pocket to not only stabilize the door, but also lift a wet door to move to the drying area. Heavy duty plastic bases attach to the bottom of the door with wood screws to enable the door to stand on its own and to nest closely with other doors of various widths and heights minimizing drying space. The PSDRID includes components for 20 interior doors, which makes it perfect for most residential projects where all interior doors need to be finished or repainted.

Additional components are available to expand the number of doors to suit your project.

Benefits

– Single Operator
– Minimises space required for spraying and drying
– Spray entire door from a stationary position
– Works with various widths and heights of doors*
– Works with hollow or solid core doors
– Door contact point is only 1mm by 38mm at the hinge pocket
– Portable for easy transport & storage with the included carry bag
– Eliminate the need to seal the entire room when spraying
– Minimal assembly required

Included

– Turntable and door support arm
– 20 VClips and wood screws
– 40 Plastic door base supports with wood screws
– Hand grips for moving wet doors
– 1 Overspary guard set
– 2 Carry bags (1 for turntable, 1 for door base supports)

Best Practices

– Insert then rotate the hand grip on the VClip side before lifting the wet door off
– Add 2-3 plastic door base supports depending on the size and weight of the door

*The PSDRID is designed to work with most interior doors, both hollow core or solid, that are 710-860mm wide and approximately 2030mm maximum in height. This is not a hard limit, but exceeding could result in less than optimal performance.

WARNING: Sharp spikes represents a potential puncture hazard.  Handle with extreme caution. Keep away from children.

Available Extras
PSDRID 10-Door Add-On Package